In this fast-changing world, the internet has become a necessity for everyday activities because it is the only thing that has changed the world into a global village. Many internet service providers are readily available for their consumers, but they give up working in some instances. With this idea, individuals begin looking for top-notch internet services, and such an alternative is Xfinity Wi-Fi. This article will focus on how to boost Xfinity wifi signal to be efficient and reliable for your daily activities.
Xfinity has several hotspots to provide an optimal internet connection to the user location. This implies Xfinity Wi-Fi consumers can quickly get their hands on reliable and uninterrupted internet connections. In contrast, there are cases when the Xfinity Wi-Fi signal starts acting up, and the internet connection gets lost.
Several factors can impact Wi-Fi connection through which you will significantly impact your internet connection activities. Since our life revolves around the internet, weak Xfinity Wi-Fi signals can cause issues. Suppose you are fronting a similar situation, and your Xfinity Wi-Fi doesn’t work at its ultimate capacity. In that case, the article has different ways through which consumers can enhance their Xfinity Wi-Fi connectivity.
What causes weak Xfinity Wi-Fi Signal?
i) Distance
Distance is one ofthe most common causes of a weak Wi-Fi signal. Wireless routers and access points are restricted to low-power broadcasts to stop interference with other equipment, restricting their effective range to around a hundred feet indoors.
The latest 802.11n Wi-Fi products may upsurge that range somewhat, but if you need a dependable network over a large area, your best bet is to use extra wireless routers or repeaters to upturn your coverage. The nearer you are to a receiver, the robust your signal will be.
ii) Device Interference
You can also find sporadic signal hitches caused by interference from other non-Wi-Fi devices. Wi-Fi operates in the 2.4 GHz band, like wireless phones and remote alarm devices. These devices can lower your Wi-Fi signal strength when active due to interference.
Furthermore, microwaves can produce considerable interference in the frequency range used by wireless devices and can entirely disturb a Wi-Fi connection. You should take care to locate your wireless nodes and equipment away from such interference to help improve signal strength.
iii) Construction
If your Wi-Fi signal strangely drops off in certain rooms, it can be due to your home’s construction. Particularly thick walls can block Wi-Fi signals, as particular construction materials. In some older houses with plaster and lath walls, a metallic mesh inside the wall efficiently blocks any Wi-Fi signal passing through, pointedly reducing signal strength or blocking the signal.
Moving your repeaters and routers inside your house may aid you in finding any upsetting construction and let you place your devices in configurations to avoid signal interference? You can read our article on how to boost Wi-Fi signals through walls to learn more.
iv) Other Wi-Fi Networks
Interference is another source of Wi-Fi signal problems. Wireless devices can transmit and receive on multiple separate channels, but in many cases, they move from the factory set to a single default channel. This can imply that many wireless sources in a small area, such as an apartment building, compete for signals in the same frequency band.
If you encounter suddenly weak Wi-Fi signals and notice other networks operating in your immediate area, try switching to other channels to find a less crowded part of the spectrum.
What are the best tips to boost Xfinity WiFi signals?
1) Wireless Mesh Networking
If you are using Xfinity Wi-Fi and get stressed with weak internet signals, the xFi Pods will be an appropriate option to improve the signal strength. Many individuals confuse it with signal boosters, but they operate differently. These mesh Wi-Fis mean integrating devices to share the signals and build a network of signals that provide an ideal internet connection all around the house.
The internet connection will be wireless and provide access to numerous access points. The good thing about these mesh Wi-Fis is that they don’t need any connection transmission while moving around the house. So, the overall experience will be direct, and you can integrate them with a router straightforwardly. This system will work for more extensive areas seamlessly!
2) Use Long-range Antennas
If you are not young, you would recall that antennas were vital to receive the signals and broadcast them on TV. Manufacturers may have been eliminated antennas with technological advances, but they have been shaping up into wireless options.
Similarly, if your Xfinity Wi-Fi isn’t functioning at its maximum capacity, the use of long-range antennas can make a significant impact.
With Xfinity Wi-Fi, there are routers and antennas attached, but it is not always confirmed that the antenna has top-notch quality. This implies that you can boost the Wi-Fi signal on a router without an antenna. It is vital to purchase a sleek omnidirectional antenna to boost Wi-Fi signals as it is a highly robust and economical choice.
3) Consider ISP with top-notch routers
Whenever you buy the Wi-Fi service, you likely use the router given by the ISP. It is good to ensure that you are using the advanced router while getting the Wi-Fi services from Xfinity. However, most ISPs install cheaper routers that can affect the speed and limit the features.
So it is essential to look up with the ISP to ensure they install the top-notch router. If the router is not top-notch, get it replaced and enjoy the robust Wi-Fi signals.
4) Use Wi-Fi Internet Signal Booster
If you are experiencing weak Wi-Fi signals with Xfinity, the router has likely stopped working efficiently, leading to the router being unable to work at its peak capacity. In this circumstance, you can use the Wi-Fi signal booster, which receives the available signal and amplifies it to resonate with strong Wi-Fi signals.
The Wi-Fi internet signal booster will aid in the development of new access points that works as extra routers. These points will improve the signal capability and strengthen by absolutely impacting the bandwidth of your Wi-Fi signals.
These signal boosters are very suitable to use, and even more, it is an appealing economical alternative! Are you worried about how to get a better Wi-Fi signal from the neighbor? The use of a Wi-Fi signal booster can be one such way.
5) Regular Rebooting of the router
It is better to restart the modem or router if there are some temporary issues with Xfinity Wi-Fi. Sometimes rebooting is vital for ensuring the modem’s health, and as far as the modem’s health is concerned, you will improve the signal performance.
With rebooting, the consumers can update the software. Furthermore, rebooting the modem can cause the Xfinity Wi-Fi signal’s speed and connection to be optimized and improved.
6) Gateway or Router Placement
Suppose your Xfinity Wi-Fi is acting out because of weak internet connections. In that case, the router location isn’t convenient enough to receive the strong signals to amplify them. So, it is advisable to place the modem or router in the central location. Many individuals mistake placing the entire setup in the basement or upper floor to get rid of wires, but it is not correct.
You need to place the router or getaway on the main floor while ensuring the tight connection of coax cables. Additionally, ensure that you place the router a bit higher from the floor. If there is whatever that can block the signals, you need to get rid of such obstructions.
You can also place the router in open spaces with thin walls. If wireless phones or consoles near the router can block the signals, you can keep them away.
7) Use the Ethernet Cable
This can be the leading cause responsible for negatively impacting the internet speed as the ineffective and unreliable cable can affect the internet signal strength. So, if your Xfinity Wi-Fi has some problem, it is essential to use the Ethernet cable as it offers excellent and effective connectivity.
These cables are suitable for gaming consoles, video streaming devices, and computers since wireless options can influence the bandwidth because of several signals in the air.
8) Update your router’s firmware
Keeping your router’s firmware up to date can enhance your internet speeds and improve your security. Many routers allow you to update your firmware within the central administration panel, so it is quick to download the new file and install it.
If you have a modem-router combo or router your internet provider provides, you may not need to update your firmware. The Xfinity Gateway does not have a firmware update option since Xfinity keeps it automatically updated.
Bottom line
Xfinity Wi-Fi is rapidly becoming more popular as the US’s Comcast Xfinity internet service grows. If you are an Xfinity customer, you may wonder how they can get a more robust internet signal within a more extensive range.
Employing the tips above will help you boost the Xfinity Wi-Fi signal at home. Fortunately, there are some free and easy steps you can take to boost your Wi-Fi from the above-discussed tips.
